Precision rolling bearings since 2004
The right bearing, specified correctly, delivered on time
Over 12,000 catalogued designations across ball, roller, thrust and housed units — each one with full dimensional and load data, interchange references and engineering support from people who read drawings for a living.
- 20+ years in rolling bearings
- 12,000 designations catalogued
- 48 h quotation turnaround
- ISO 9001 certified manufacturing
Products
The range, shown as it leaves the line
Ball, roller and housed units, each with the dimensions, load ratings and interchange references an engineer actually needs.
-
Deep groove ball bearings
The everyday radial bearing, listed with clearance, seal and cage.
-
Tapered roller bearings
Combined radial and axial load, single-row or paired.
-
Spherical roller bearings
Heavy radial load and misalignment, for conveyors and gearboxes.
-
Housed units
Pillow blocks and flanges, ready to bolt on.
Industries
Specified for the duty, not the catalogue page
The same designation behaves differently in a gearbox, a grain auger and a wash-down line. Start from the application.
-
Mining and conveyors
Shock, dust and continuous load. Clearance and sealing chosen for the duty.
-
Wind energy
Large bearings for slow, heavy rotation and long service intervals.
-
Food and beverage
Wash-down, stainless housings and lubricants that are allowed on the line.
-
Agriculture
Seasonal shock loads, contamination and parts that have to be in stock at harvest.
Why specify SXX
A bearing is a calculation before it is a component
Most premature failures are specification failures — the wrong clearance for the fit, the wrong seal for the environment, a limiting speed read from the wrong column. We publish the complete data set for every designation and we will work through the duty with you before you order, not after the bearing comes back.
-
Measured, not claimed
Every production lot is checked for raceway geometry, radial clearance, hardness and vibration level. Certificates of conformity ship with the goods and stay available on your part pages.
-
ISO 9001 discipline
Material traceability from 100Cr6 billet to finished designation, with heat-treatment records held for ten years. Audited annually, and we will host your audit too.
-
Engineering on the phone
Application engineers answer enquiries directly — life calculations, fit and clearance selection, lubrication intervals and failure analysis, not a ticket queue.
-
Stock that reflects reality
Ex-stock lines are genuinely on the shelf in Jinan and Rotterdam. Made-to-order lines carry an honest lead time, quoted before you commit.
Example match
- Their designation
- 6205-2RS
- SXX equivalent
- SXX 6205-2RS
Same boundary dimensions. Seal and clearance are listed beside the match, not assumed.
Cross-reference
Replacing another brand? Start from their designation
Our interchange index maps common designations to the SXX equivalent and, crucially, tells you where the equivalence stops — clearance class, cage material and seal profile are listed side by side so you can see what actually changes on your machine.
- Dimensional equivalence shown against the ISO boundary dimensions
- Differences in clearance, cage and sealing called out explicitly
- Reviewed by an engineer before it reaches the page
Customers
Specified once, ordered again
Maintenance teams and buyers, on the part that arrived and the data that came with it.